fuel gas natural gas condensation prevention Self-limiting temperature heating cable are both flammable gases, so it is important to select suitable and reliable fuel gas natural gas condensation prevention Self-limiting temperature heating cable. Condensates jeopardize the ability of the fuel system to meet the needs of the fuel system manufacturers and suppliers. Gas producers must design for extraction
And the transmission system will meet the growing demand and require little maintenance. These systems are required to provide consistent thermal performance of high quality fuels while minimizing environmental impact,110v America and Canada use heating cable.
fuel gas natural gas condensation prevention heating cable Design background
Natural gas condensate (NGL) is a mixture of water and hydrocarbon liquids that exists in gaseous form in feedgas and wet gas Wells produced from crude oil. The temperature, moisture content and pressure of natural gas can influence the formation of condensate. Fuel, at ambient temperatures, there may be gas condensates at the wellhead. Even gas Wells with little fluid at production time can form condensate heavy hydrocarbons such as ethane, propane, butane, and pentane when cooled below the hydrogen dew point of approximately 23°F (-5°C). Condensate can increase the maintenance cost of gas transmission lines by corroding pipes and clogging components. In addition to damage to the system, condensate can cause flow measurement errors and flow rate changes in fuel characteristics.
As one of the best heat tracing cable manufacturers in China, we design self-limiting heat tracing cables to meet the requirements of performance, which can be used to wrap the warm gas around pipes, valves, pumps, regulators and other system components that are higher than the dew point temperature to prevent the formation of condensed water. At the same time, the explosion-proof type self-limiting temperature heat tracer cable is selected, which has passed the certification of China explosion-proof organization and is suitable for dangerous places. It is the perfect choice of fuel extraction and transmission system. Self-adjusting cable maximizes output at its ambient temperature of -40°F (-40°C) and can control the output power without a thermostat. We provide heat tracing cables and explosion-proof certified installation accessories, so that the whole heat tracing system can work in a reliable performance.
fuel gas natural gas condensation prevention Self-limiting temperature heating cable structure
(1) Copper core bus: 7*0.42,
(2) Heating core: ordinary PTC, flame-retardant PTC, fluorine-containing PTC
(3) Insulation layer: modified polyolefin, flame retardant polyolefin
(4) Shielding layer: Magnesium alloy round wire braided layer or tinned copper wire braided, covering density ≥80%
(5) Sheath layer: perfluorinated material;Fuel Gas Self-limiting temperature heating cable